Wet underfloor heating works best when it goes in during an extension, a kitchen refit or a new bathroom. We lay the pipe at the right spacing on insulation, connect it to a manifold and pressure test it before the screed goes down.
How we install it
- Heat loss worked out for each room
- Insulation and pipe laid in loops to the right spacing
- Manifold and pump fitted with a labelled zone per room
- Pressure tested before screeding
- Thermostats wired and the system balanced
The manifold in the photo runs a separate zone for each room, so you only heat the spaces you use.
How it works
- PlanRooms, floor build-up and heat loss.
- LayInsulation and pipe loops.
- TestPressure tested before screed.
- CommissionBalanced and thermostats set.
Related work
Questions
Can underfloor heating run off my boiler?
Yes. It connects through a manifold with its own pump and mixing valve.
Does it work with a heat pump?
Very well, because it runs at lower water temperatures.
Can it go under any floor?
Tiles and stone are best. Wood and carpet work with the right underlay and settings.